Glove Compartment Lid

Glove Compartment Lid

Removing






- Remove the glove compartment. Refer to => [ Glove Compartment without Knee Airbags ] Glove Compartment without Knee Airbags.

- Remove the hinge pin from the brake component. Refer to => [ Glove Compartment Cover Brake Component ] Glove Compartment Cover Brake Component.

- Pry off lining mat - 1 - using a screwdriver - arrow - and remove.

- Place the glove compartment on a soft surface.






- Tap out left and right hinge pins - 1 - using a drift punch - arrow -.

- Remove glove compartment cover - 3 - from the glove compartment - 2 -.

Installation

Install in reverse order of removal. Note the following: