Sunroof / Moonroof: Testing and Inspection

Motor Adaptation

• In order for the sunroof to work correctly after the motor has been removed/installed or replaced, perform an adaptation.

Sunroof Motor

- Switch on the ignition and close the doors, if necessary, close the sunroof.

- Pull the sunroof control switch and hold it in that position for 15 seconds.

- The sunroof panel will lift, it will open all the way and then it will close.

• Keep the sunroof switch pulled during the adaptation process.

• This completes the adaptation process.

• If new motors have been installed, then the adaptation process will start 15 seconds after the switch has been activated.