Backrest Assembly Overview

Backrest Assembly Overview






1 Footrest

• Removing and Installing, refer to => [ Foot Rest ] Foot Rest

2 Backrest Cover

• Removing and Installing, refer to => [ Backrest Cover ] Backrest Cover

3 Bolt

• Quantity: 2

• 6.5 Nm

4 Bolt

• Quantity: 2

• 6.5 Nm

5 Bracket

• For the backrest cover

• Removing and Installing, refer to => [ Backrest Cover Bracket ] Backrest Cover Bracket

6 Trim

• For the backrest cover

• Removing and Installing, refer to => [ Rear Seat Entertainment Mount ] Rear Seat Entertainment Mount

7 Headrest

• Removing and Installing, refer to => [ Headrest ] Headrest

8 Backrest

• Removing and Installing, refer to => [ Backrest ] Backrest

9 Wiring Harness

• From the side airbag to the connector station

• Depending on the vehicle, other wiring harnesses might also be present, e.g. for a backrest heater or rear seat entertainment

10 Bolt

• Quantity: 4

• Self-locking

• Always replace if removed.

• Threaded holes for screws must be cleaned, for example, with thread cutter

• 33 Nm

11 Trim

• Quantity: 2

• Removing and Installing, refer to => [ Backrest Hinge Trim ] Backrest Hinge Trim

12 Expanding Rivet

13 Seat Belt Guide

• Removing and Installing, refer to => [ Seat Belt Guide ] Seat Belt Guide

14 Bolt

• 10 Nm

15 Lower Seat Frame

16 Rubber Strap

• Quantity: 2

• With hooks