Backrest Hinge Trim

Backrest Hinge Trim

• The procedure for removing and installing is described for driver seat sill side backrest hinge. The procedure is similar for the tunnel side backrest hinge trim.

Removing






- Remove trim on tunnel side or sill side, as required:

• => [ Tunnel Side Trim ] Tunnel Side Trim.

• => [ Sill-Side Trim with Front Trim ] Sill-Side Trim with Front Trim.

- Remove sill side expanding rivet - 2 -.

- Release catches - arrows - using a screwdriver, remove backrest hinge trim - 1 -.

Installing

Install in reverse order of removal. Note the following:

Installation note: For example tightening specifications, replace components => [ Backrest Assembly Overview ] Backrest Assembly Overview.