Rear Seat Backrest Blower Fan V273/V272

Rear Seat Backrest Blower Fan V273/V272

Left rear seat backrest blower fan (V273) / right rear seat backrest blower fan (V272)

Removing






• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and Testing Procedures ] Description and Operation.

• Before handling pyrotechnic components (for example, disconnecting the electrical connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

- Seat frame Remove the rear seat backrest. Refer to => [ Lower Seat Frame/Rear Seat Backrest ] Lower Seat Frame/Rear Seat Backrest.

- Free up and disconnect harness connector - 1 -.

- Spray the rubber protrusions - arrows - of the elastic blower fan mount - 2 - with silicon-free lubricating spray.

- Detach blower fan from the rubber protrusions.

Installing

• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and Testing Procedures ] Description and Operation.

• Before handling pyrotechnic components (for example, connecting the electrical connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

• Observe all measures when installing the rear seat. Refer to => [ Lower Seat Frame/Rear Seat Backrest ] Lower Seat Frame/Rear Seat Backrest.

Install in reverse order of removal. Note the following:

- Set sealing ring for blower fan in place and install blower fan.