Plenum Chamber Cover

Plenum Chamber Cover






1 Plenum chamber cover

• Windshield wiper arms removed.

• Remove the hood seal in the area around the plenum chamber cover.

• For easier removal/installation, spray windshield edge strip with soapy solution.

• Remove trim panel upward diagonally from edge frame beginning at window edge.

Risk of window breaking during installation

Do not hit the trim when installing it.

Carefully press in trim sideways, beginning in the edge frame.

- Unclip the plenum chamber cover from the side covers starting on the left and right sides and then remove it.

2 Right gasket

• Position is on the hole and on the plastic piece and then press on it.

3 Bolt

• 3 Nm

• Bolted together with the front cover => [ Release Cable Cover, Removing and Installing ] Hood Release Cable Assembly Overview.

4 Right plenum chamber cover

• Remove the plenum chamber cover before removing.

5 Bolt

• 6 Nm

6 Windshield

7 Molding

8 Left plenum chamber cover

• Removal => [ Release Cable Cover,
Removing and Installing ] Hood Release Cable Assembly Overview

9 Left gasket

• Position is on the hole and on the plastic piece and then press on it.