Diagram 20/21 (Tracks 267-280)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Air quality sensor, A/C pressure/temperature sensor, Humidity sensor in fresh air intake duct, Vehicle electrical system control module, A/C compressor regulator valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G238 - Air quality sensor Components Outside Pass Compartment

G395 - A/C pressure/temperature sensor A/C Compressor and Condenser

G657 - Humidity sensor in fresh air intake duct Components Outside Pass Compartment

J519 - Vehicle electrical system control module Control Modules in Front Part Of Vehicle

N280 - A/C compressor regulator valve A/C Compressor and Condenser

ST2 - Fuse panel 2

SF11 - Fuse 11 (on fuse panel F) Overview Of Fuses

T2kn - Double connector

T3bd - 3-pin connector

T3be - 3-pin connector

T14b - 14-pin connector, in the engine compartment, left

T16c - 16-pin connector Vehicle Electrical System Control Module -J519-

T17b - 17-pin connector Vehicle Electrical System Control Module -J519-

T17k - 17-pin connector, in the connector station, right A-pillar Overview of Connector Stations

T17m - 17-pin connector, in 7-pin relay carrier

(43) - Ground connection on A-pillar, lower right

(377) - Ground connection 12 (in main wiring harness)

(381) - Ground connection 16 (in main wiring harness)

(639) - Ground connection on left A-pillar

(B280) - Positive connection 4 (15a) (in main wiring harness)

(B699) - LIN bus connection 4 (in main wiring harness)

* - Only for vehicles without hybrid drive

*2 - Refer to applicable wiring diagram for fuse positions

Previous Diagram 20/20 (Tracks 253-266)

Next Diagram 20/22 (Tracks 281-294)