Diagram 40/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver side rear multicontour seat switch, Driver side rear seat adjustment control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E660 - Driver side rear multicontour seat switch

J876 - Driver side rear seat adjustment control module

SF1 - Fuse 1 (on fuse panel F) Overview Of Fuses

ST5 - Fuse panel 5

T4ga - 4-pin connector

T12ac - 12-pin connector

T17s - 17-pin connector, in the coupling point for the left rear seat Overview of Connector Stations

T17w - 17-pin connector, in the coupling point for the rear center armrest Overview of Connector Stations

T32n - 32-pin connector

(61) - Ground connection on left C-pillar

(165) - Ground connection 1 (in rear seat adjustment wiring harness)

(387) - Ground connection 22 (in main wiring harness)

(416) - Ground connection (in rear armrest wiring harness)

(688) - Ground connection 2 on center tunnel

(M92) - Connection 1 (in rear armrest wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Depending on equipment

*3 - Only for vehicles with the seat reclining function

Previous Diagram 40/2 (Tracks 1-14)

Next Diagram 40/4 (Tracks 29-42)