Diagram 52/29 (Tracks 379-392)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine control module 2, Positive crankcase ventilation heating element, EVAP canister purge regulator valve 1, Camshaft adjustment valve 2, Transmission mount valve 2, Exhaust camshaft adjustment valve 2, Fuel metering valve 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J624 - Engine control module 2 Control Modules in Front Part Of Vehicle

N79 - Positive crankcase ventilation heating element

N80 - EVAP canister purge regulator valve 1 Locations

N208 - Camshaft adjustment valve 2 Locations

N263 - Transmission mount valve 2 Locations

N319 - Exhaust camshaft adjustment valve 2 Locations

N402 - Fuel metering valve 2 Locations

T2br - Double connector

T2bz - Double connector

T2dl - Double connector

T2gq - Double connector

T2gr - Double connector

T2ld - Double connector

T60a - 60-pin connector Engine Control Module (ECM) 2 -J624-

(D113) - Connection 11 (in engine compartment wiring harness)

Previous Diagram 52/28 (Tracks 365-378)

Next Diagram 52/30 (Tracks 393-406)