Fuel Pump Control Module (J538)

Fuel Pump Control Module (J538)

Removing






- Follow all safety precautions. Refer to => [ Safety Precautions ] Safety Precautions.

- Follow the guidelines for clean working conditions. Refer to => [ Clean Working Conditions ] .

Danger of causing damage to other electronic components when disconnecting the battery.

• Complete the steps for disconnecting the battery.

- Disconnect the Ground (GND) cable - 2 - from the battery.

- Remove the right rear underbody panels..

- Disconnect the connector - 2 -.






- Remove the nuts - arrows - and remove the fuel pump control module - 1 -.

Installing

Install in reverse order of removal. Note the following:

• Tightening specification, refer to => [ Fuel Delivery Unit Overview ] Fuel Delivery Unit Overview.

- Connect the battery. Be sure to read the procedures after connecting the battery.