A/T - Hesitation During Driving
37 Hesitation concerns under certain driving conditions37 13 93
2033046/1
February 18,2013.
Vehicle Information
Condition
Customer feels hesitation during driving.
Technical Background
Incorrect software calibration may cause hesitation.
Production Solution
Further transmission control module, J217 (02), software calibration addressed the condition.
Service
SVM Update Instructions
1. Follow all instructions in the attached TSB, 2011732 00 Software Version Management (SVM), operating instructions.
2. Update the transmission control module, J217 (02), using the SVM action code as listed in the table if necessary.
3. Clear adaptations and perform standstill adaptation.
Warranty
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
The following Technical Service Bulletin will be necessary to complete this procedure:
^ TSB 2011732 00 Software Version Management (SVM), operating instructions.
All part and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Dept. and service manuals for the latest information.