Seat Adjustment Control Head

Seat Adjustment Control Head

• The procedure for removing and installing backrest and headrest adjustment actuators is the same.

• Removal and installation can be done with front seat installed.

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Carefully pry off actuator - 1 - from the latch using the trim removal wedge (3409).

Installing

Install in reverse order of removal. Note the following:

Installation note: For example tightening specifications, replace components => [ Seat Adjustment Control Head/Switch Module Operation Assembly Overview ] Seat Adjustment Control Head/Switch Module Operation Assembly Overview.