Child Seat Anchorage, Checking Function

Child Seat Anchorage, Checking Function

To check function, you must install entire belt system, including side trim.

Switching hold function on

• Pull out seat belt as far as the stop.

Correct function

• Belt must retract with a chattering sound.

• If retracting process is stopped, belt cannot be pulled out anymore.

Deactivating

• Belt retraction to about 100 mm remaining.

• Hold function must switch off with a remainder of 100 mm, at the latest. Belt functions normally again.

If the seat belt child seat anchorage does not work, replace the seat belt