Diagram 5/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Pedestrian protection trigger 1, Pedestrian protection center crash sensor, Airbag control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G570 - Driver side pedestrian protection crash sensor

G571 - Front passenger side pedestrian protection crash sensor

G598 - Pedestrian protection trigger 1

G599 - Pedestrian protection trigger 2

G693 - Pedestrian protection center crash sensor

J234 - Airbag control module Control Modules in Front Part Of Vehicle Locations

T2ea - Double connector

T2eb - Double connector

T2ec - Double connector

T3c - 3-pin connector, in the engine compartment, left rear

T3d - 3-pin connector, in the engine compartment, right rear

T14a - 14-pin connector, behind the bumper, center front

T100 - 100-pin connector Locations

(43) - Ground connection on A-pillar, lower right

(376) - Ground connection 11 (in main wiring harness)

(377) - Ground connection 12 (in main wiring harness)

(381) - Ground connection 16 (in main wiring harness)

(639) - Ground connection on left A-pillar

* - Only for vehicles with Japan equipment

*2 - From June 2011

Previous Diagram 5/10 (Tracks 113-126)

Next Diagram 5/12 (Tracks 141-154)