Materials

Materials






* Observe minimum curing time. Refer to => [ Minimum Curing Times ] Minimum Curing Times.

* Double cartridge pistol (VAS 5237) must be used to process this material.

* Heat according to manufacturer instructions using cartridge heater (V.A.G 1939 A).

* Small cartridge (110 ml) for sealing and/or when a 400 ml double cartridge is not sufficient.

Adhesive Sealant, Removing from Window

It is recommended to use adhesive remover D 002 000 10 as a cleaning solution. Follow the safety precautions when using it.

When cleaning from vehicle interior out, the window just installed must not be pressed outward.

Paint surfaces

- First, clean paint surfaces with a dry cloth. Remove residual adhesive with adhesive remover D 002 000 10.

Plastic trim

- Let the adhesive sealant harden (approximately 1 hour) and then peel it off.