Window Guide

Window Guide






1 Window guide

• Removing

- Remove the door trim panel and the window frame trim..

- Remove the C-pillar trim. Refer to => [ Rear Door Window Shaft Strip, B-Pillar Trim, C-Pillar Triangle Trim ] Rear Door Window Shaft Strip, B-Pillar Trim, C-Pillar Triangle Trim.

- Door window removed. Refer to => [ Rear Door Window ] Rear Door Window.

- Unhook the window guide on the bottom of the window frame from the flange.

- Remove the window guide on the B-pillar (self-adhesive).

- Remove the window guide from the B-pillar trim and unclip it (4x) on the C-pillar.

- Remove the inner window shaft strip from the door flange.

- Remove the window guide on the B-pillar and on the C-pillar from the door.

- Remove the window guide from the door.

• Installing

- For easier installation, coat window guide with a soap solution.

- Position the window guide at the top of the B-pillar and then push it to the rear into the guide with the clip.

- When doing this, the molded piece must contact the door.

- Press the window guide on the window frame and clip it to the C-pillar.

- Install the trim on the B-pillar and on the C-pillar and push it into the window guide.

- Press the window shaft strip back on.

The adhesive surface must be free of dust and grease.

- Clean the adhesive surface on the door with cleaning solution (D 009 401 04).

- Tape the sealing profile for the window guide to the B-pillar with two-sided adhesive tape.

2 Door

3 C-pillar trim

• Removed.

4 B-pillar trim

Install Guide






- Push the guide and the clip - 1 - onto the top of the B-pillar - arrow - as illustrated.