Telephone Transceiver, CAN

Telephone Transceiver, CAN

The telephone transceiver (R36) is located under the front passenger's seat.

Special tools, testers and auxiliary items required

• Protective Cap for Cable Connector (VAS 6223/9)

- Switch off all electrical consumers.

- Remove the ignition key.

- If control module is replaced, select replacement function for appropriate control module in guided fault-finding routine.

Use the vehicle diagnosis, testing and information system (VAS 5051) to do so.

Removing

- Remove the right front seat.

- Fold back the floor mat.

- Disengage cover of E-box - 2 - and open the E-box - 1 -.





The telephone transceiver is only wedged into the electronics box.

- Pry the telephone transceiver - 5 - out of the E-box - 4 -.





- Disconnect the connector - 3 - (connector - 2 - not installed).





- Disconnect Bluetooth antenna (R152) - 1 -.

Installing

- Install in reverse order.

- Adapt the Bluetooth connection between the telephone transceiver and cellular telephone (R54).