Side Instrument Panel Vent

Side Instrument Panel Vent

Special tools, testers and auxiliary items required

• Hook (3438)

• Removal and installation is described for the driver side of the vehicle. It is identical on the passenger side.

Removing






• There is a hole - arrows - on the side of the instrument panel vent at the top (3438) for attaching the hook.

- Carefully remove the instrument panel vent - 1 - out of its opening alternating from the side to the top using the (3438).

- Vehicles with illumination: Disconnect the connector on the instrument panel vent.

Installation

Installation is reverse of removal, but note the following:

• Check the clips for damage or deformation and replace them if necessary.

- When sliding the instrument panel vent into the installation opening, make sure the air duct engages correctly.

- Press the instrument panel vent into the installation opening as far as the stop.