Roof Grab Handle

Roof Grab Handle

Special tools, testers and auxiliary items required

• Offset screwdriver

Removing







Unclip the expanding caps - 1 - and - 3 - but only up to their lock position (do not pull them out all the way otherwise the silicone brake and spring and fall out and then the handle has to be replaced).

- Unclip expanding caps - 1 - and - 3 - to the locking position using an offset screwdriver - 2 -.

- Remove the roof grab handle - 4 - from the body opening.

Installation

- Insert the grab handle in the body cut-out.

- Press the roof grab handle expanding caps on until they engage completely.