Exterior Rearview Mirror Glass

Exterior Rearview Mirror Glass

Special tools, testers and auxiliary items required

• Pry Lever (80 - 200)

• Protective Gloves

Removing

- Protect the upper and lower corners of the housing with tape to prevent paint damage.





- Press the mirror glass - 1 - up and down from the mirror adjusting unit using the pry lever (80 - 200) - arrow -.


• Wear protective gloves.

- Disconnect the - 1 - heated mirror electrical connectors on the back of the mirror glass - 2 -.





- Unclip the connector from the bracket, if applicable.

Installation

- Position the mirror glass on the mirror adjusting unit and press it on.

- Press the wires into the clips - 3 -.

• Only press in the center of the mirror when pressing the mirror glass on.