Lock Carrier with Attachments Assembly Overview

Lock Carrier with Attachments Assembly Overview


On vehicles with distance regulation (ACC), observe the following.

If the lock carrier is removed and reinstalled or changes are made to ACC bracket, distance regulation adjustment must be carried out.






1 Bolt

• 55 Nm

• 3 pieces per side.

2 Side Impact Bar

• Secured to the lock carried with the bolt - 7 -.

• Do not remove with the bracket when removing the lock carrier.

3 Lock Carrier

• The coolant for the water cooler must be drained before removing.

Removing

• Remove the lock carrier cover.

- Remove front bumper.

- Disconnect all electrical wires and hoses to the lock carrier at the connection points.

- Disconnect hood lock cable at coupling. Refer to => [ Hood Lock Cable Assembly Overview ] Hood Lock Cable Assembly Overview.

- Remove the bolts - 5 -.

- Remove the bolts - 1 - on the longitudinal member (quantity: 3 per side).

• The impact absorbers with the brackets are secured to the lock carrier with one bolt each - 1 - and must not be removed.

- Remove the bolts - 6 - on the lower lock carrier.

- Remove the lock carrier with the headlamps forward.

• Installation is reverse of removal.

• All headlamps must be adjusted after installation.

4 Bolt

• 5 Nm

5 Bolt

• 1.5 Nm

6 Bolt

• 4 Nm

• Secures the impact bar to the lock carrier.