Trim, Sill Side

Trim, Sill Side

• Removal and installation can be done with seat installed.

Removing






- Raise the front seat all the way up.

- Remove the release lever. Refer to => [ Release Lever ] Release Lever.

- Remove seat height adjustment handle. Refer to => [ Seat Height Adjustment Handle ] Seat Height Adjustment Handle.

- Remove the screw - 3 - and the remove the trim spreader clip - 2 -.

- Disengage the rear trim - 1 - on the seat - arrow A -.

- Pull the trim slightly toward the rear, remove it from the bracket- 4 - and then remove it forward - arrow B -.

- Remove sill side trim.

Installation

Installation is reverse of removal, but note the following:

• Make sure the trim on the sill side is correctly attached to the mounting bracket.

Tightening specifications,refer to => [ Sill and Tunnel Side Trim Overview ] Sill and Tunnel Side Trim Overview.