Pass-Through Door Cover

Pass-Through Door Cover

Removing






- Remove the rear center armrest. Refer to => [ Center Armrest ] Center Armrest.

- Remove the pass-through door. Refer to => [ Pass-Through Cover ] Pass-Through Cover.

- Pry off and remove the retaining strips - 2 - on the back side of the pass-through door - 3 - - arrow -.

- Disengage the retaining strips - 4 - on the front side of the pass-through door.

- Remove the cover - 1 - from the pass-through door.

Installation

Installation is reverse of removal, but note the following:

- Make sure the retaining strips engage correctly and the cover is not wrinkled.