Backrest Release Actuator

Backrest Release Actuator

Special tools, testers and auxiliary items required

• Removal Wedge (3409)

• Removal and installation are same for right and left.

Removing






- Pull the release lever - 1 - and release the rear seat backrest.

- Hold the release lever pulled and remove the screw - 3 -.

- Pry the backrest release actuator - 2 - out of the trim using the (3409) - arrow - and remove it.

- Unclip the cable on the backrest release actuator.

- Disengage the cable ball studs and remove the backrest release actuator.

Installation

To install, perform the steps used in removal in reverse order.

Tightening specifications, refer to => [ Backrest Release Overview ] Backrest Release Overview.