Cowl: Service and Repair

Plenum Chamber Bulkhead Assembly Overview






1 Seal

• Slide the gasket on from below

2 Lock Washer

• When installing, simply press the plenum chamber bulkhead onto the threaded pins.

3 Nut

• 4 Nm

4 Bolt

• 7 Nm

5 Plenum Chamber - Bulkhead

• When removing, remember there are different versions.

• Before removing:

- Remove the tower brace.

- Loosen the washer fluid reservoir.

- Disconnect the vacuum line to the brake booster at the connection to the plenum chamber bulkhead.

- Unclip the vacuum line from the plenum chamber bulkhead.

• Remove the bolts - 1 - and nut - 4 -.

6 Plenum Chamber