Diagram 85/21 (Tracks 267-280)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Distance regulation control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J428 - Distance regulation control module Control Modules in Front Part Of Vehicle

J519 - Vehicle electrical system control module Overview of Control Modules in interior of vehicle

J533 - Data bus on board diagnostic interface Overview of Control Modules in interior of vehicle

J769 - Lane change assistance control module Control Modules in rear part of vehicle, overview Lane Change Assistance Assembly Overview

ST1 - Fuse panel 1

SC9 - Fuse 9 (on fuse panel C) Overview Of Fuses

T8a - 8-pin connector Locations

T12h - 12-pin connector

T16v - 16-pin connector

T17f - 17-pin connector, brown Overview Of Connector Stations

T20d - 20-pin connector Locations

(B108) - CAN bus extended high connection 1 (in main wiring harness)

(B109) - CAN bus extended low connection 1 (in main wiring harness)

(B665) - CAN bus extended high connection 1 (in instrument panel wiring harness)

(B666) - CAN bus extended low connection 1 (in instrument panel wiring harness)

* - Only for vehicles with adaptive cruise control (ACC)

*2 - Refer to applicable wiring diagram for fuse positions

*3 - Only for vehicles with lane assist

*4 - Depending on equipment

*5 - Data bus wire (CAN bus)

Previous Diagram 85/20 (Tracks 253-266)

Next Diagram 85/22 (Tracks 281-294)