Rear Lid Closed Sensor

Rear Lid Closed Sensor

Removing







Danger of unintended engine ignition.

Turn off the ignition and remove the ignition key from the vehicle interior for all work performed on the high voltage vehicle.

- Switch off ignition and remove ignition key.

- Remove the rear lid trim panel..

- Remove screws - arrows - and remove rear lid closed sensor - 1 -.

Installing

• Tightening specification, refer to => [ Bumper Cover Tail Lamps Overview ] Bumper Cover Tail Lamps Overview.

Install in reverse order of removal, observing the following:

- Install the rear lid trim panel..