Front ABS Wheel Speed Sensors

Front ABS Wheel Speed Sensors

• The sensor ring/rotor is installed in the respective wheel bearing unit and cannot be replaced.

Removing

- Raise vehicle.

- Unlock and disconnect connector - 1 - on speed sensor.





- Remove bolt - 2 -.

- Remove speed sensor from wheel bearing housing.

Installing

Installation is in reverse order of removal, with special attention to the following:

- Before inserting speed sensor, clean hole inner surface and coat speed sensor all-round with Polycarbamide grease G 000 650.

- Turn the steering completely left and right after installation, making sure the speed sensor wiring has sufficient clearance.

- Lower vehicle.