Rear ABS Wheel Speed Sensors
Rear ABS Wheel Speed Sensors
Left rear illustration.
1 - Speed sensors G44 and G46
2 - Socket head bolt
• 9 Nm.
• The sensor ring/rotor is installed in the respective wheel bearing unit and cannot be replaced.
Removing
- Raise vehicle.
- Unlock and disconnect the connector - 1 - on speed sensor.
- Remove bolt - 2 -.
- Remove speed sensor from wheel bearing housing.
Installing
Installation is the reverse of removal, with special attention to the following:
- Before inserting speed sensor, clean hole inner surface and coat speed sensor all-round with Polycarbamide grease G 000 650.
- Lower vehicle.