Gears, Hydraulic Controls

Fastener Tightening Specifications






ATF Oil Pan - Tightening Specification and Sequence

• Replaced the bolts for the ATF pan.

- Tighten the bolts in three steps in the sequence shown:












Mechatronic, Tightening Specification and Sequence

- Tighten the bolts to 10 Nm in the following sequence: - 1 to 19 -.





• Bolts - 18 - and - 19 - are shorter.

• Bolt - 18 - attaches the transmission output speed sensor (G195) to the transmission housing.

• Bolt - 19 - attaches the Mechatronic connector to the transmission housing.