Fluid Filter - A/T: Service and Repair

ATF Filter

Special tools, testers and auxiliary items required

• Oil Collecting and Extracting Device (V.A.G 1782)

Removing

• Clean working conditions for the automatic transmission. Refer to => [ Clean Working Conditions ] Clean Working Conditions.

• General repair instructions, refer to => [ Repair Information ] Repair Information.

- Remove the ATF oil pan. Refer to => [ Automatic Transmission Fluid Oil Pan ] Service and Repair.

- Place the (V.A.G 1782) under the transmission.

- Carefully pull the ATF filter downward and off the Mechatronic.

Installing

Install in reverse order, paying attention to the following:

- Mount the O-ring - 2 - on the ATF filter - 1 -.





- Clean both magnets - arrows -. Make sure the magnets completely contact the depressions in the ATF filter.





- Mount the ATF filter on the Mechatronic.

• The collar - 1 - on the ATF filter must be installed all the way into the opening - 2 - in the Mechatronic.





• The mount - 4 - on the back must fit into the bolt - 3 - on the Mechatronic.

- Install the ATF pan. Refer to => [ Automatic Transmission Fluid Oil Pan ] Service and Repair.

- Fill the ATF. Refer to => [ ATF, Draining or Filling after Repair ] ATF, Draining or Filling After Repair.