Rear Window Regulator

Window Regulator






1 Window regulator

• Removing

• Door trim removed.

• Window regulator motor removed. Refer to=> [ Window Regulator Motor ] Rear Window Regulator Motor.

• Door glass removed. Refer to=> [ Front Door Window ] Front Door Window

• Door cover removed. Refer to=> [ Door Cover ]

- Release the window regulator motor threaded pins and push it through the inside panel.

- Only loosen the upper nut.

- Remove the lower nuts and lift the window regulator out of the key hole.

- Remove the window regulator through the opening in the door inner panel.

2 Door

3 Nut

• 6 Nm

• For removing the window regulator, only loosen the top, remove the bottom.

Release the Threaded Pins





- Release the clips - arrow - on the window regulator threaded pins - 3 - using an 11 mm socket by sliding the socking onto the threaded pins.

Upper Connecting Point for Window Regulator





- To remove the window regulator - 1 - only remove the nut - 2 -.