MMI CD Changer

MMI CD Changer

The CD changer (R41) is located in the glove compartment.

Special tools, testers and auxiliary items required

• Radio Removal Tool (T10057)

• Fiber Optic Plier Repair Set (VAS 6223)

• Protective cap for cable connector (VAS 6223/9)

- If control module is replaced, select replacement function for appropriate control module in guided fault-finding routine.

Use the vehicle diagnosis, testing and information system (VAS 5051) to do so.

- Switch off all electrical consumers.

- Remove the ignition key.

Removing

- Open glove box.

- Insert two clips on (T10057) in release slits on CD changer until they engage. Points on the grip eyelets of tool face outward.





- Remove CD changer from mounting frame.

- Disconnect all connectors on the CD changer.

- Attach the (VAS 6223/9) - 1 - onto the MOST-Bus connector - 2 -.





- Remove (T10057), push locking tabs on CD changer to do so.

- Unclip the front trim piece from the CD changer.

Installing

- Connect all harness connectors.

- Slide CD changer into mounting frame until it engages.