Bumper Cover Side Components

Bumper Cover Side Components

• In order to disassemble the individual components, the bumper cover must be completely removed.






1 Front Spoiler

• Removal and Installation, refer to => [ Front Spoiler ] Front Spoiler

2 Bolt

• 2.5 Nm

3 End Plate

• Removed with the bumper cover.

• Remove the screws on the spoiler and remove it to the rear.

4 Connection

• Clipped into the radiator grille at the bottom

5 Right Air Intake Grille

• To remove, insert a screwdriver an at angle from underneath into the opening on the top, pry it upward and loosen the cover.

• Beginning at the top of the radiator grille, remove the air intake grille from the cover.

6 Right Bumper Cover

• Remove the screws on the radiator grille, unclip the spoiler locking mechanisms at the bottom and remove it sideways from the connecting piece.

7 Radiator Grille

• Removal and Installation, refer to => [ Radiator Grille ] Radiator Grille

8 Bolt

• 2.5 Nm

9 Left Bumper Cover

• Remove the screws on the radiator grille, unclip the spoiler locking mechanisms at the bottom and remove it sideways from the connecting piece.

10 Left Air Intake Grille

• Removal is the same as for the right grille