Fender End Plate

Fender End Plate






1 Fender

2 End Plate

- Remove front wheel.

- Remove the rear part from the wheel housing liner. Refer to => [ Front Wheel Housing Liner ] Service and Repair.

• Loosen the fluid reservoir on the left side.

- Remove the bolts - 3 - , unclip the end plate from the fender rear bracket. and slide it downward. Refer to=> [ (Item 6) Nut ] Fender Assembly Overview

3 Screws

• 1.5 Nm

4 Clip

• Quantity: 2