Diagram 65/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver seat lumbar support curvature adjustment motor, Driver seat lumbar support height adjustment motor, Left rear footwell lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E176 - Driver seat lumbar support adjustment switch Power Front Seat Component Overview

J519 - Vehicle electrical system control module Overview of Control Modules in interior of vehicle

ST3 - Fuse panel 3

SC3 - Fuse 3 (on fuse panel C) Overview Of Fuses

T4u - 4-pin connector, in the driver seat

T10p - 10-pin connector, red Overview Of Connector Stations

T17l - 17-pin connector Vehicle Electrical System Control Module -J519-

V125 - Driver seat lumbar support curvature adjustment motor Power Front Seat Component Overview

V129 - Driver seat lumbar support height adjustment motor Power Front Seat Component Overview

W45 - Left rear footwell lamp

(50) - Ground connection in luggage compartment, left Locations

(368) - Ground connection 3 (in main wiring harness)

(371) - Ground connection 6 (in main wiring harness)

(639) - Ground connection on left A-pillar Locations

(B433) - Footwell illumination connection (in main wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Only for vehicles with footwell lamp

*3 - Diameter depends on equipment

Next Diagram 65/3 (Tracks 15-28)