Diagram 50/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


ESP sensor unit, ESP sensor unit 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G200 - Transverse acceleration sensor Locations

G202 - Rotation rate sensor Locations

G251 - Longitudinal acceleration sensor Locations

G419 - ESP sensor unit Locations

G536 - ESP sensor unit 2 Locations

J492 - All wheel drive control module Control Modules in rear part of vehicle, overview Locations

J792 - Active steering control module Overview of Control Modules in interior of vehicle

T4ab - 4-pin connector

T6m - 6-pin connector

T10h - 10-pin connector Locations

T47b - 47-pin connector Locations

(368) - Ground connection 3 (in main wiring harness)

(370) - Ground connection 5 (in main wiring harness)

(639) - Ground connection on left A-pillar Locations

(B135) - Positive connection 1 (15a) (in interior wiring harness)

(B663) - Suspension sensor CAN bus high connection (in main wiring harness)

(B664) - Suspension sensor CAN bus low connection (in main wiring harness)

* - Only for vehicles with all wheel drive

*2 - Depending on equipment

*3 - Omitted as a running change

*4 - Running change

Previous Diagram 50/2 (Tracks 1-14)