Diagram 98/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Interior rearview mirror, Humidity sensor, Rain/light recognition sensor, Automatic dimming interior rearview mirror





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

EX5 - Interior rearview mirror

G355 - Humidity sensor Locations A/C System Inside Pass Compartment

G397 - Rain/light recognition sensor Locations

J400 - Wiper motor control module Control Modules in Front Part Of Vehicle

J519 - Vehicle electrical system control module Overview of Control Modules in interior of vehicle

J910 - Automatic dimming interior rearview mirror relay Overview of Relay

ST1 - Fuse panel 1

ST2 - Fuse panel 2

SC3 - Fuse 3 (on fuse panel C) Overview Of Fuses

SC12 - Fuse 12 (on fuse panel C) Overview Of Fuses

T3c - 3-pin connector

T4g - 4-pin connector Locations

T8b - 8-pin connector

T8c - 8-pin connector

T16b - 16-pin connector Vehicle Electrical System Control Module -J519-

W1 - Front interior lamp

Y7 - Automatic dimming interior rearview mirror Overview of Control Modules in interior of vehicle

(277) - Ground connection 3 (in interior wiring harness)

(639) - Ground connection on left A-pillar Locations

(B475) - Connection 11 (in main wiring harness)

(B627) - Positive connection 3 (15) (in main wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Refer to applicable standard equipment wiring diagram

*3 - Only for vehicles with automatic dimming interior rearview mirror

*4 - Only for vehicles without Start/Stop system

*5 - Only for vehicles with Start/Stop system

Next Diagram 98/3 (Tracks 15-28)