Diagram 1/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument cluster control module, Radio frequency controlled clock receiver





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument cluster control module Overview of Control Modules in interior of vehicle

J489 - Radio frequency controlled clock receiver

J533 - Data bus on board diagnostic interface Overview of Control Modules in interior of vehicle

ST2 - Fuse panel 2

SD4 - Fuse 4 (on fuse panel D) Overview Of Fuses

SD5 - Fuse 5 (on fuse panel D) Overview Of Fuses

T3i - 3-pin connector

T17c - 17-pin connector, in the left A-pillar connector station Overview Of Connector Stations

T20d - 20-pin connector Locations

T32f - 32-pin connector Locations

T46s - 46-pin connector Overview Of Connector Stations

(135) - Ground connection 2 (in instrument panel wiring harness)

(A1) - Positive connection (30a) (in instrument panel wiring harness)

* - through April 2009

*2 - Refer to applicable wiring diagram for fuse positions

*3 - Refer to applicable wiring diagram

*4 - from May 2009

Previous Diagram 1/2 (Tracks 1-14)

Next Diagram 1/4 (Tracks 29-42)