Diagram 115/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Electronic damping control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J250 - Electronic damping control module Control Modules in rear part of vehicle, overview

J532 - Voltage stabilizer Control Modules in rear part of vehicle, overview

ST1 - Fuse panel 1

ST2 - Fuse panel 2

SF6 - Fuse 6 (on fuse panel F) Overview Of Fuses

SC8 - Fuse 8 (on fuse panel C) Overview Of Fuses

T12aa - 12-pin connector Voltage Stabilizer -J532-

T47a - 47-pin connector Connector Locations

(51) - Ground connection in luggage compartment, right Locations

(249) - Ground connection 2 (in interior wiring harness)

(B273) - Positive connection (15) (in main wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Only for vehicles with Stop/Start system

Next Diagram 115/3 (Tracks 15-28)