Fog Lamp

Fog Lamp

Removing







Danger of unintended engine ignition.

Turn off the ignition and remove the ignition key from the vehicle interior for all work performed on the high voltage vehicle.

- Switch off ignition and remove ignition key.

- Turn light switch into the "0" position.

- Using a screwdriver - 1 - release the hooks in the direction of - arrow A -.

- Remove the intake air grille - 2 - on the bumper cover in the direction of - arrow B -.

- Remove screws - 1 - and - 2 -.






- Remove the headlamp housing - 3 - from the bumper cover while guiding the retaining tab - arrow - out of the mount.

- Disconnect the electrical connector.

Installing

• Tightening specification, refer to => [ Fog Lamps Overview ] Fog Lamps Overview.

Install in reverse order of removal, observing the following:

- Adjusting fog lamps. Refer to => [ Headlamps, Checking and Adjusting Conditions ] Headlamps, Checking and Adjusting Conditions.