Headlamp Range Control Adjuster Trim

Headlamp Range Control Adjuster Trim

Removing






- Remove the driver side instrument panel cover. Refer to => [ Driver Side Instrument Panel Cover ] Driver Side Instrument Panel Cover.

- Remove the headlamp range control adjuster.

- Unclip the trim - 2 - at the top and move it forward - arrow -.

- Remove the trim from the cut-out in the instrument panel cover on the driver side.

Installation

Installation is reverse of removal, but note the following:

- Insert the tab - 1 - into the cut-out in the instrument panel cover on the driver side and push on it until the locks into place.