Outer Bulb Holder

Outer Bulb Holder

Removing







Danger of unintended engine ignition.

Turn off the ignition and remove the ignition key from the vehicle interior for all work performed on the high voltage vehicle.

- Remove the outer cap on the opening - 2 - in the direction of the - arrow -.

- Remove the key - 1 - from the mount in the cap and position is on the bulb holder.

- Turn the bulb holder - 1 - and - 2 - with the key - 3 - counterclockwise, in the direction of the - arrow -.






- Remove the bulb holder from the tail lamps and remove the bulbs.

Installing

Install in reverse order of removal, observing the following:

- Insert the new bulb into the socket without touching the bulb with bare hands.