Radiator Cooling Fan Control Module: Service and Repair

Coolant Fan Control Module 2 (J671)

• The following description is based on a coolant fan with a separate coolant fan control module.

Removing

- Remove the front noise insulation - 1 -..







Risk of injury from coolant fan starting by itself.

• Before working in the fan shroud area, disconnect the electrical connectors.

- Disconnect the coolant fan electrical connector - 1 - by sliding the retainer back - arrow - and pressing the release down.






- Free up the electrical wiring harness to the coolant fan control module.

- Disconnect the connectors - 2 and 3 -.






- Remove the bolt - arrow - and the coolant fan control module - 1 -.

Installing

• Tightening specification, refer to => [ Radiator and Coolant Fan Overview ] Radiator and Coolant Fan Overview.

Install in reverse order, paying attention to the following:

- Install the noise insulation..