3-Pin Relay/Fuse Panel

3-Pin Relay/Fuse Panel

Removing






- Switch off ignition and remove ignition key.

- Remove driver's storage compartment.

- Disengage the 3-pin relay/fuse panel by pressing the retaining springs in the direction of the - arrow - and remove the relay/fuse panel - 1 -.

- Unclip the fuse panel from the relay/fuse carrier.

- Remove the relay and control modules.






- Release the retaining clips in the direction of the - arrows - and press the relay carrier - 2 - back and out of the bracket - 1 -.

• The exact assignment of the 3-pin relay/fuse panel can be found in the applicable wiring diagram.

Installing

Install in reverse order of removal, observing the following:

- Install driver's storage compartment.