Auto Trans 0B6

Component Locations: Transmission Systems

Automatic Transmission 0B6



Note:
• The mechatronic unit can only be replaced as a complete unit


Mechatronic Unit






- The mechatronic unit is bolted to the underside of the transmission housing and is covered by the transmission oil pan
- The mechatronic unit incorporates the hydraulic control, the TCM, the multifunction TR switch and the sensors and actuators as a complete synchronized unit
- The mechatronic unit can only be replaced as a complete unit
The mechatronic unit incorporates the following:
• Transmission Control Module (TCM) -J217-

• Multi-Function Transmission Range (TR) Switch -F125-

• Transmission Input Speed (RPM) Sensor -G182-

• Transmission Output Speed (RPM) Sensor -G195-


Wiring Harness






- - Wiring Harness in Transmission
- Location: The wiring harness -A- with connector -C- is attached to the mechatronic unit -B-