Final Drive, Differential (0B6A Automatic Transmission)

Fastener Tightening Specifications






Center Differential Housing - Tightening Specifications and Sequence






- Tighten the center differential housing bolts in three steps as follows:

- Tighten the bolts - 1 and 2 - to 3 Nm.

- Tighten the bolts to 8 Nm in the following sequence: - 1 to 6 -.

- Tighten the bolt in the following sequence: - 1 through 6 - plus 90° additional turn.

Front Final Drive Cover - Tightening Specifications and Sequence






- Tighten the bolts - 1 and 2 - to 3 Nm.

- Tighten the bolts to 23 Nm in the following sequence: - 1 through 11 -.