Drive Axle

Drive Axle

Removing

- Loosen the connection between the drive axle and wheel hub. Refer to => [ Threaded Connection Between Drive Axle and Wheel Hub, Loosening and Tightening ] Procedures.

- Remove the wheel.

- Remove coil spring. Refer to => [ Coil Spring ] Removal and Replacement.

- Remove the rear muffler.

- Remove rear final drive.

- Remove the rear speed sensor - 1 -. Remove bolt - 2 - to do so.






- Remove the drive axle toward the inside.

Installing

Install in reverse order of removal. Pay attention to the following:

Tightening specifications, refer to => [ Drive Axle Assembly Overview, with 89 mm Diameter Outer CV Joint and 100 mm Diameter Inner CV Joint ] Drive Axle Assembly Overview, With 89 mm Diameter Outer CV Joint and 100 mm Diameter Inner CV Joint.

Tightening specifications, refer to => [ Drive Axle Assembly Overview, with 94 mm Diameter Outer CV Joint and 107 mm Diameter Inner CV Joint ] Drive Axle Assembly Overview, With 94 mm Diameter Outer CV Joint and 107 mm Diameter Inner CV Joint.

- Install rear final drive.

- Install the exhaust system rear muffler.

- Install coil spring. Refer to => [ Coil Spring ] Removal and Replacement.

- Install the rear speed sensor.

- Tighten the wheels.

- Tighten the drive axle to wheel hub threaded connection. Refer to => [ Threaded Connection Between Drive Axle and Wheel Hub, Loosening and Tightening ] Procedures.