Data Bus On Board Diagnostic Interface (J533) Connectors, From MY 08

Data Bus On Board Diagnostic Interface (J533) Connectors, From MY 08

Data Bus On Board Diagnostic Interface





1 MOST bus
2 Black 20-pin connector (T20)

• Unlisted connector terminals are not used.

1 - MOST bus





1 Input
2 Output

2 - Multi-Pin Connector, Black 20-pin (T20)





1 Terminal 30
2 LIN 1 from the generator (C)/battery monitoring control module (J367)
5 CAN bus low (Comfort)
6 CAN bus low (Powertrain)
7 CAN bus low (Extended)
8 CAN-bus low (Instrument cluster)
9 CAN bus low (Diagnosis) to the Data Link Connector (DLC) (T16)
10 Ring-break diagnostic cable
11 Terminal 31
14 Terminal 15
15 CAN bus high (Comfort)
16 CAN bus high (Powertrain)
17 CAN bus high (Extended)
18 CAN bus high (Instrument cluster)
19 CAN bus high (Diagnosis) to the Data Link Connector (DLC) (T16)
20 Screen ground