Center Armrest Support Base 1 and 2 Trim

Center Armrest Support Base 1 and 2 Trim

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)






Removing

- Remove the center armrest trim. Refer to => [ Center Armrest Trim ] Center Armrest Trim.

- Remove the support base trim - 1 -: Press around the seam with the trim removal wedge (3409) on the trim - 2 - and pull the trim - 1 - forward until it unlatches.






- Do the same on the other side and pull the trim - 1 - forward.

- Remove the support base trim - 2 -: Fold the center armrest down.

- Press the trim - 2 - with the trim removal wedge (3409) down as far as possible and remove the trim.

Installation

Install in reverse order of removal.

- The trim - 2 - latches after inserting it at points - 3 - by pushing it in - direction of arrow -.






- Make sure trim - 2 - and - 1 - latch on points - 4 - left and right as illustrated.